fortiap showing some unassigned ip add in the "connecting via" column

[Allwyn_Mascarenhas]

HI ppl

I have not assigned anything to the fortiaps and still i see this 40.2 ip in the connecting via column as in the picsThe ap is on internal5 port and the port is set to dedicated to ext device with an dummy ip of 169.X.X.X.

Screens:

[link]http://i.imgur.com/Tbmx5hY.jpg[/link] http://i.imgur.com/XXJsLKd.jpg

I tried to reset the ap following this doc: http://kb.fortinet.com/kb/microsites/search.do?cmd=displayKC&docType=kc&externalId=FD36190&sliceId=1...

But i keep getting the wtp-profile not set error and when i try to create some wtp-profile i get the not found in datasource error.

Any help please. Thanks.

[Bromont_FTNT · Accepted solution]

The FAP221 has a reset button on the top above the Fortinet logo... it's just a little pinhole.... push in for 10-15 seconds

[Allwyn_Mascarenhas]

Bromont wrote:

The FAP221 has a reset button on the top above the Fortinet logo... it's just a little pinhole.... push in for 10-15 seconds

Damn i totally missed it. On top it the fortinet chat fella missed it too. Thanks.