Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
New Contributor

firmware image old FGT60



I have an old Fortigate 60 and I wanted to restore the system to it's default because I lost the login credentials. During boot I wanted to use the maintainer procedure to restore the settings but unfortunately I pasted the commands during the boot and now I have a formatted system but I don't have a firmware image (seems that you cannot download this from Fortinet if you don't have an active support contract).


I got the following message during boot:


FGT60 (11:24-04.25.2005) Ver:04000000 Serial number:FGT-603xxxxxxxxx RAM activation Total RAM: 128MB Enabling cache...Done. Scanning PCI bus...Done. Allocating PCI resources...Done. Enabling PCI resources...Done. Zeroing IRQ settings...Done. Verifying PIRQ tables...Done. Boot up, boot device capacity: 30MB. Press any key to display configuration menu... ...... Open boot device failed.


Can somebody share me a firmware image or tell me how I can download the image without having a support contract (the device is only used at home to provide a personal lab)


Thanks and kind regards




Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Top Kudoed Authors