fgt 80c loopback

[Fullmoon]

is there anybody here on how to cross connect/loopback ports of fgt80c for hqip image?

[ShrewLWD]

Hi Fullmoon, I believe most of the HQIP images now will actually give you an ASCII graphic representation on the console display as the HQIP image starts up, and wait for you to confirm you have that wiring in place. This link has an attachment at the bottom showing how they used to do it, you will notice they tend to do the same thing (eg. 1-2, 3-4, etc.). http://kb.fortinet.com/kb/microsites/search.do?cmd=displayKC&docType=kc&externalId=FD30363&sliceId=1&docTypeID=DT_KCARTICLE_1_1&dialogID=61526775&stateId=0 0 61528455

[Fullmoon]

hi shrewLWD thanks for the info.