Hello
I have fortiauthenticator have a version 6.5.2 and fortigate ( client Radius) have a version 7.0.1
so my work i want that customer wireless authenticated by mail through fortiauthenticator .
So my problem :
failed test connectivity between fortigate and fortiauthenticator . ??
despite they have same secret and forigate can ping to fortiauthenticator
so please i need a reply and a help from expert fortinet !!
thanks in advance
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Can you take a pcap on Fortigate/FortiAuthenticator to capture the packets on port 1812 and check if there is any response back from FortiAuthenticator or any errors?
Also try re-configuring the secret on both ends to something simple.
Thanks for your reply
my question i want to know which password in fortigate and fortiauthenticator !!
i configure any password or password of account ??
i wait your reply
thanks
Set the same secret/passkey in the RADIUS server config on FortiGate, and the RADIUS client configuration on FortiAuthenticator - it's essentially a preshared key like for IPSec or similar.
hello
i use in fortigate : authentication method default and without PAP or Chap !!
so test connectivity is failed !!
please how i can found the exact problem !!
i wait a reply
thanks
Doing a pcap can help /
I send all my work in this forum
please can you check !!
Thanks
Are you talking about the password in below command? If so, it is the password configured in radius server for the user-id
diagnose test authserver radius <radius server_name> <authentication scheme><username> <password>
Hey safwa,
in addition RADIUS server configuration on FortiGate, you need the following on FortiAuthenticator:
- allow RADIUS on the interface (under System > Network > Interface)
- RADIUS client entry (FortiGate's IP, plus secret) under Authentication > RADIUS Service > Clients
- RADIUS policy to allow authentication under Authentication > RADIUS Service > Policy
-> set up a simple policy with the configured RADIUS client and local realm to start with, just to test if the connection works
If it still fails, check with a packet capture as Suraj suggested.
You can also check the RADIUS debug log in FortiAuthenticator under https://<FortiAuthenticator>/debug.
Please i need a help
i try all your reply but still failed test connectivity between fortigate and FortiAuthenticator radius
but Our goal we want client wireless authenticate with mail through FortiAuthenticator !!
how i can resole and i try to chek but still failed
i wait areply from expert fortinet
thanks
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1517 | |
1013 | |
749 | |
443 | |
209 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.