fail-detection

ede_pfau · ‎06-05-2013

hello, I am looking for a description of the fail detect parameters:

config sys interface edit <n> set fail-detect enable set fail-detect-option detectserver set fail-alert-method {link-down|link-failed-signal} set fail-alert-interfaces {port...}

I can find the syntax in the CLI Guide but no hints how to use this feature. Nothing in the KB. Can anybody enlighten me, please?

Ede

"Kernel panic: Aiee, killing interrupt handler!"

Dave_Hall · ‎06-05-2013

Only reference I could find is KB #FD33176.

NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C

ede_pfau · ‎06-05-2013

Great, thanks for searching. Seems to be unchartered territory... This one here KB #30626 is even older. Neither one explains the ' advanced' parameters or how it works. For example, ' fail-alert-interfaces' could be those interfaces which are forced ' link-down' if a failure of the monitored interface is detected. Or something completely different.

Ede

"Kernel panic: Aiee, killing interrupt handler!"