On my FG100G I have created a local-in-policy with the command:
config firewall local-in-policy
edit 1
Then I have entered just 'set' and hit enter to see a list of all commands but it did not show any command list.
I entered 'show' and it shows the uuid.
I configured the local-in-policy and when I enter show it shows the policy settings and the uuid.
Do I have to remove the uuid or is this something I don't have to worry about?
May thanks in advance
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Don't touch it and leave them alone.
https://docs.fortinet.com/document/fortigate/6.0.0/handbook/79854/uuid-support
Toshi
Additionally, you cannot really delete this even if you try to:
FGT-7-2-0 (0) # show
config firewall local-in-policy
edit 1
set uuid 697eaaae-bb29-51ec-dd0e-e7b552859385
next
end
FGT-7-2-0 (0) # unset uuid
UUID attribute cannot be unset directly.
Command fail. Return code -37
Don't touch it and leave them alone.
https://docs.fortinet.com/document/fortigate/6.0.0/handbook/79854/uuid-support
Toshi
Thank you very much. Have a good one :)
Additionally, you cannot really delete this even if you try to:
FGT-7-2-0 (0) # show
config firewall local-in-policy
edit 1
set uuid 697eaaae-bb29-51ec-dd0e-e7b552859385
next
end
FGT-7-2-0 (0) # unset uuid
UUID attribute cannot be unset directly.
Command fail. Return code -37
Thanks Yuri :)
Hello,
"Then I have entered just 'set' and hit enter to see a list of all commands but it did not show any command list."
After typing 'set' command, don't you should type a question mark to see available possibilities (and not enter again)
Also this issue has been resolved and it turned out the FG50E is faulty and has been replaced.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1696 | |
1091 | |
752 | |
446 | |
228 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.