Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
Foxx
New Contributor III

edit Local-in-policy

On my FG100G I have created a local-in-policy with the command:

config firewall local-in-policy

edit 1

Then I have entered just 'set' and hit enter to see a list of all commands but it did not show any command list.

I entered 'show' and it shows the uuid.

I configured the local-in-policy and when I enter show it shows the policy settings and the uuid.

Do I have to remove the uuid or is this something I don't have to worry about?

 

May thanks in advance 

 

2 Solutions
Toshi_Esumi
SuperUser
SuperUser

Yurisk
SuperUser
SuperUser

Additionally, you cannot really delete this even if you try to:

 

FGT-7-2-0 (0) # show
config firewall local-in-policy
    edit 1
        set uuid 697eaaae-bb29-51ec-dd0e-e7b552859385
    next
end

FGT-7-2-0 (0) # unset uuid 
UUID attribute cannot be unset directly.
Command fail. Return code -37

 

Yuri https://yurisk.info/  blog: All things Fortinet, no ads.

View solution in original post

Yuri https://yurisk.info/ blog: All things Fortinet, no ads.
6 REPLIES 6
Toshi_Esumi
SuperUser
SuperUser

Foxx
New Contributor III

Thank you very much. Have a good one :)

Yurisk
SuperUser
SuperUser

Additionally, you cannot really delete this even if you try to:

 

FGT-7-2-0 (0) # show
config firewall local-in-policy
    edit 1
        set uuid 697eaaae-bb29-51ec-dd0e-e7b552859385
    next
end

FGT-7-2-0 (0) # unset uuid 
UUID attribute cannot be unset directly.
Command fail. Return code -37

 

Yuri https://yurisk.info/  blog: All things Fortinet, no ads.
Yuri https://yurisk.info/ blog: All things Fortinet, no ads.
Foxx
New Contributor III

Thanks Yuri :)

marypoppins
New Contributor II

Hello,

"Then I have entered just 'set' and hit enter to see a list of all commands but it did not show any command list."

After typing 'set' command,  don't you should type a question mark to see available possibilities (and not enter again)

Foxx
New Contributor III

Also this issue has been resolved and it turned out the FG50E is faulty and has been replaced.

Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors