Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
tetelu
New Contributor

dynamic IP Pool for VLAN interface

Hi,

I have a problem with assigning a Dynamic IP Pool to a VLAN interface (to access internet)

On physical interface is working, but not on the VLAN.

I just upgraded to a FortiGate 501E with 6.0.4 from a 800C with 5.6.3. On the old Fortigate is working just fine

I attached both policies and networks (I use a 10Gb interface for multiple VLANS I have)

 

Thanks!

4 REPLIES 4
Jirka1
Contributor III

Hi,

do you have a range of addresses that uses a dynamic pool routed from ASR to FGT?

 

Jirka

tetelu
New Contributor

Nor sure if I understood correctly your question.

I have a /24 routed from ASR.

 

And with the old fortigate is working just fine, with same rules.

 

Thanks

Dai
New Contributor II

Is the only difference between models and FortiOS? Is it possible to reach each vlan interface IP of FW.
tetelu
New Contributor

I foud the problem.

After I cleared the ARP cache on Cisco ASR it started to work

 

Thank you!

Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors