Hi Team,
We have an issue with the OSPF configuration. Please find below the details:
In my deployment, I have:
1 interface that is connected to the inside
2 interfaces that are connected to the outside: RTR-1 and RTR-2.
I want to have an OSPF configuration on both the RTR-1 and RTR-2.
****RTR-1 will be in area 0.0.0.1.
****RTR-2 will be in area 0.0.0.2.
And I want to distribute:
172.18.201.0/24 only to the area 0.0.0.1 (RTR-1).
172.18.202.0/24 only to the area 0.0.0.2 (RTR-2).
Thank you in advance
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Below KB explains how to filter routes between areas to control/restrict routes to specific areas.
https://community.fortinet.com/t5/FortiGate/Technical-Tip-Configuring-OSPF-to-filter-Inter-Area-rout...
Hi,
I understand that you want to filter incoming routes in OSPF. You can achieve this using the Distribute-route-map-in feature.
Note: Distribute-route-map-in feature to filter routes in OSPF, is useful only in case if filter LSA type 5 (External ) routes or matching the TAG value needs to be done.
You may refer to this link for the same.
https://community.fortinet.com/t5/FortiGate/Technical-Tip-Inbound-route-filtering-in-OSPF-using-dist...
BR,
Manosh
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1517 | |
1013 | |
749 | |
443 | |
209 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.