Hi all
I used "diagnose traffictest" on Fortigate 60F and 100F (6.4.14) several times without any issues and I found tons of blogs, documentations and thread about those commands.
However, the very same commands do NOT work on a Fortigate 600F (with the same 6.4.14)- it seems that they have a different iperf-version on it or whatever.
I am really struggling to find out how to change the iperf-server IP, the port that should be used and the time it should run...all the commands I was using so far with 60F/100F do not work and I struggle really hard to find documentations.
Anyone an idea?
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Try # di traffictest ?
The output on 7.2.6 are as follows:
show Traffic settings show
run Start traffic.
server-intf Server interface.
client-intf Client interface.
port TCP or UDP port number (1 - 65535).
proto 0 for TCP or 1 for UDP (default = 0)
Client upload: # di traffictest run -c <IP_address>
Client download: # di traffictest run -R -c <IP_address>
For instance, if you use port 5201, then the command are as follows:
di traffictest port
di traffictest run -c <IP_address> -p 5201
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1634 | |
1063 | |
751 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.