Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
scheuri
New Contributor III

diagnose traffictest on a Fortigate 600F with 6.4.14 - not the same as on a 60F/100F?

Dear community and support

 

I have troubles running "diagnose traffictest" on a Forigate 600F with 6.4.14 - I have no idea how to configure the destination server IP and the port to be used. for the run command

 

I was using "diagnose traffictest" on Fortigate 60F and 100F running 6.4.14 several times without any issues as I have the commands necessary:

 

diagnose traffictest client-intf wan1
diagnose traffictest server-intf wan1
diagnose traffictest port 5201
diagnose traffictest run -c <iperf-server-ip> -t 60

 

 

However, that does NOT work on a Fortigate 600F with the same version (6.4.14) - that device seems to use different commands and I fail to find any useful documentation (to at least change the server IP, the port to the server and a way to make it run more than 10s).

 

Any one an idea?

 

1 REPLY 1
Renante_Era
Staff
Staff

You can confirm the command options using:

di traffictest ?

If that didn't work, you are probably using a vdom so type:

end

config vdom

edit ? <--- list vdom name

edit <vdom_name> <-- case sensitive

 

Furthermore, di traffictest run -c <IP> -p 5201 is for client upload, thus use -R for client download di traffictest run -R -c <IP>.

 

If you're just testing internet speed, then personally, I use https://fast.com

Top Kudoed Authors