Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
martyyy
New Contributor III

dia fdsm fds-update command is not working

FG-601E and FOS 7.0 GA.

To list image dia fdsm fds-update command is not working.

(global) # dia fdsm fds-update
Timed out.

 

Appreciate your advise on how I resolved this issue. TIA :) 

5 REPLIES 5
AEK
SuperUser
SuperUser

If your firewall has a valid contract then it may have an issue communicating with FortiGuard. Either fix the communication issue or try again in a while.

AEK
AEK
martyyy
New Contributor III

Hi @AEK  
The Firewall has a valid contract and check the FortiGuard connectivity. 

# execute ping guard.fortinet.net
PING guard.fortinet.net (12.34.97.71): 56 data bytes

--- guard.fortinet.net ping statistics ---
5 packets transmitted, 0 packets received, 100% packet loss

# execute ping service.fortiguard.net
PING guard.fortinet.net (208.184.237.61): 56 data bytes

--- guard.fortinet.net ping statistics ---
5 packets transmitted, 0 packets received, 100% packet loss

# execute ping update.fortiguard.net
PING fds1.fortinet.com (173.243.138.71): 56 data bytes

--- fds1.fortinet.com ping statistics ---
5 packets transmitted, 0 packets received, 100% packet loss


I think this may contribute to why the command dia fdsm fds-update is not working. 
Im currently looking into this article. 
https://community.fortinet.com/t5/FortiGate/Troubleshooting-Tip-Unable-to-connect-to-FortiGuard-serv...

AEK

Hi Marty

Does your WAN interface have a private IP address plus a secondary public IP address?

AEK
AEK
kaurm
Staff
Staff

Hi Marty,

Please run the following command

diagnose fdsm fds-update
diagnose fdsm image-upgrade-matrix
diagnose fdsm image-list

--> Reference: https://community.fortinet.com/t5/FortiGate/Technical-Tip-The-Common-Error-or-Warning-Messages-which...

diagnose debug rating

martyyy
New Contributor III

# config global

(global) # dia fdsm fds-update
Timed out.

(global) # diagnose fdsm fds-update
Timed out.

(global) # diagnose fdsm image-upgrade-matrix
Result=Error.

(global) # diagnose fdsm image-list
Result=Error.

 

# diagnose debug rating
Locale : english

Service : Web-filter
Status : Disable

Service : Antispam
Status : Disable

Service : Virus Outbreak Prevention
Status : Disable

Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors