dhcp Maximum number of entries has been reached.

[muerte]

Hi all,

We have FG100D and I need use only static entries in dhcp but limit is 200.

Is any option to trick this limit?

Is only one way move dhcp out of FG?

Muerte

[Dave_Hall]

According to the Maximum Values Table, 200 is the max number of reserved IP and/or Mac addresses.  This limit is hard coded into the fgt hardware.  If you need to have a large number of reserved "static entries" you may be better off with running DHCP (service) off an internal server (which you already surmised).  Alternately, as a workaround on the fgt you could pretty much set the lease time to unlimited, thus given each device a virtual "static IP".