- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
device registration message after FAZ upgrade
Dear Team,
We have upgraded FAZ from v7.0.12 to v7.2.7 and post that getting error message "Please register this device" while trying to login to the FAZ gui.
Please find attached snap and guide.
Regards,
Ganesh
Solved! Go to Solution.
- Labels:
-
FortiAnalyzer
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi @ganesh_karale ,
Kindly ensure that FAZ has Internet connection for FortiGuard to validate the license information. If your FAZ has access to the Internet, kindly run the following CLI commands and verify again:
# diagnose fmupdate service-restart fds
Wait 5 minutes, then run,
# diagnose fmupdate updatenow fds
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Our current FortiManager is not compatible with 7.2.7 and we haven't pushed the new firmware out to all of production (we like to be cautious with this stuff to prevent downtime). If we started with FortiManager first, we would need to upgrade all of our gates with it so that we could still centrally manage our network https://tutuapp.uno/ .
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi @ganesh_karale ,
Kindly ensure that FAZ has Internet connection for FortiGuard to validate the license information. If your FAZ has access to the Internet, kindly run the following CLI commands and verify again:
# diagnose fmupdate service-restart fds
Wait 5 minutes, then run,
# diagnose fmupdate updatenow fds