crate report in FortiAnalyzer

[uearn]

Hello, I have FortiGate 176 Device using 2 WAN internet link (3BB,NT,MPLS). I want to make internet usage report, customize wan for each link, how to create report in FortiAnalyzer?

Thank you.

[nradia_FTNT]

Hello,

You can look at following useful articles to create reports on FortiAnalyzer:

https://community.fortinet.com/t5/FortiAnalyzer/Technical-Tip-How-to-build-a-custom-report-on-FortiA...

https://docs.fortinet.com/document/fortianalyzer/7.4.2/administration-guide/2854/list-of-report-temp...

https://docs.fortinet.com/document/fortianalyzer/7.4.2/administration-guide/753346/generating-report...

[uearn]

Hello, nradia_FTNT

Thank you so much , I will try to do as you suggest.

[uearn]

Hello, @nradia_FTNT 

Do you have any recommended Report Templates?

[smkml]

Hi @uearn ,

You may try to use "Throughput Utilization Billing Report" which can select each of your interface and you need to enable some settings as per document below:

https://docs.fortinet.com/document/fortianalyzer/6.4.0/new-features/367769/throughput-utilization-bi...

[uearn]

Hello, smkml

Thank you so much , I will try to do as you suggest.

[uearn]

Hello, @smkml 

Do you have any recommended Report Templates?