Good afternoon.
Are there any recommendations to prevent the fortigate equipment from entering conservation mode?
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hi @unknown1020 - Here, maybe this article can help: https://community.fortinet.com/t5/FortiGate/Technical-Tip-Free-up-memory-to-avoid-conserve-mode/ta-p...
Hi @unknown1020,
Please refer to this article: https://community.fortinet.com/t5/FortiGate/Technical-Tip-Reduce-memory-usage-by-reducing-the-number...
Regards,
Hello @unknown1020 ,
Thank you for contacting the Fortinet Forum portal.
I would suggest verifying which process is taking memory either ipsengine or ipshelper or wad and then adjusting the counter engine count which would limit the process usage.
-And it also depends on the model hardware.
refer to the below article for the scripts that can help to set automatic stitch which does an automatic restart of the process :
information and details to verify which type of conserve mode either proxy or kernel:
https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-conserve-mode-is-triggered/ta-p/198580
Best regards,
Manasa.
If you feel the above steps helped resolve the issue, mark the reply as solved so that other customers can get it easily while searching for similar scenarios.
In addition to all above recommendations, keep your FG at the recommended release.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.