Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
Duy2003
New Contributor III

config HA

I don't see the mgmt port in the Management Interface Reservation configuration

 

3 REPLIES 3
ozkanaltas
Valued Contributor III

Hello @Duy2003 ,

 

Does your mgmt interface have a reference? If it has firstly, you need to remove these references before configuring the dedicated mgmt interface.

If you have found a solution, please like and accept it to make it easily accessible to others.
NSE 4-5-6-7 OT Sec - ENT FW
If you have found a solution, please like and accept it to make it easily accessible to others.NSE 4-5-6-7 OT Sec - ENT FW
esalija
Staff
Staff

Hi @Duy2003 ,

Thank you for choosing Fortinet Community.

 

Please be aware that the Port that you want to use for 'HA Reserved Management Interface' should not be referenced/used in any configuration.

The interface needs to be cleared from all configurations and references, and 'Ref' needs to be 0.

 

After you can configure the HA Reserved Interface using the below KB - https://community.fortinet.com/t5/FortiGate/Technical-Tip-HA-Reserved-Management-Interface/ta-p/1901...

 

Best regards,

Erlin

LauraWhite
New Contributor

Thank you so much for the link.

Announcements
Check out our Community Chatter Blog! Click here to get involved
Labels
Top Kudoed Authors