I don't see the mgmt port in the Management Interface Reservation configuration
Hello @Duy2003 ,
Does your mgmt interface have a reference? If it has firstly, you need to remove these references before configuring the dedicated mgmt interface.
Hi @Duy2003 ,
Thank you for choosing Fortinet Community.
Please be aware that the Port that you want to use for 'HA Reserved Management Interface' should not be referenced/used in any configuration.
The interface needs to be cleared from all configurations and references, and 'Ref' needs to be 0.
After you can configure the HA Reserved Interface using the below KB - https://community.fortinet.com/t5/FortiGate/Technical-Tip-HA-Reserved-Management-Interface/ta-p/1901...
Best regards,
Erlin
Thank you so much for the link.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1737 | |
1107 | |
752 | |
447 | |
240 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.