Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
communicate with each other two or more SSIDs
Good morning, I'm new to fortinet devices.
I have FortiAp access points and two ssids that distribute two different networks and I can not make those two networks that distribute the ssids communicate with each other.
help !![
2 REPLIES 2
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
For two wifi networks to communicate with each other, you need:
Firewall rules allowing traffic to/from each wifi interface.
Disable "Block Intra-SSID Traffic" in the SSID wifi properties if you want wifi clients on the same wifi network to communicate with each other. (Setting is unchecked by default.)
NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C
NSE4/FMG-VM64/FortiAnalyzer-VM/6.0
(FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Are you using FortiGate as a controller? I was assuming you're using FortiCloud.
In that case, if you're set up SSIDs with NAT mode, I don't think they can talk each other. Bridged with vlans is necessary so that a router/switch terminating both vlans/subnets can route them each other.