Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
nikolaj
New Contributor

changes in VPN phase II

If I need to make a change in the VPN phase II, this change must be execute at the same time at both ends of the vpn tunnel otherwise the tunnel go down?

 

2 Solutions
ede_pfau
SuperUser
SuperUser

That depends.

 

If, for example, you add another encryption/MAC pair to the existing one, traffic will continue to flow. If you change the key lifetime the shorter of both will be negotiated and traffic continues.

Usually, you make the changes on the remote side, see the tunnel down or not, and make the changes on the local side. Or, to play safe, enable HTTPS or SSH access on the WAN port of the remote FGT temporarily.

Ede Kernel panic: Aiee, killing interrupt handler!

View solution in original post

Ede Kernel panic: Aiee, killing interrupt handler!
MikePruett
Valued Contributor

yeah, just setup the new phase 2 for that tunnel on the local side and then setup the mirror image of it on the remote side. then that phase 2 should become active and you can have that traffic flow as well.

View solution in original post

Mike Pruett Fortinet GURU | Fortinet Training Videos
7 REPLIES 7
ede_pfau
SuperUser
SuperUser

That depends.

 

If, for example, you add another encryption/MAC pair to the existing one, traffic will continue to flow. If you change the key lifetime the shorter of both will be negotiated and traffic continues.

Usually, you make the changes on the remote side, see the tunnel down or not, and make the changes on the local side. Or, to play safe, enable HTTPS or SSH access on the WAN port of the remote FGT temporarily.

Ede Kernel panic: Aiee, killing interrupt handler!
Ede Kernel panic: Aiee, killing interrupt handler!
nikolaj

In particular I need to add new subnets in the Remote section of Phase II VPN.

Does this operation need to be accomplished at the same time at both ends of the tunnel?

 

rwpatterson
Valued Contributor III

This should be independent of the operating subnets. No downtime should occur because your are not mucking with the already established tunnels.

 

I just reread what you typed. What do you mean by "the remote section of the phase II VPNs"?

Bob - self proclaimed posting junkie!
See my Fortigate related scripts at: http://fortigate.camerabob.com

Bob - self proclaimed posting junkie!See my Fortigate related scripts at: http://fortigate.camerabob.com
nikolaj

In IPsec SA (Phase II) | Traffic to be encrypted | Local | Remote

I have to add new subnets in the 'Remote' column.

rwpatterson
Valued Contributor III

If you are truly adding and not expanding upon the existing, then you are fine.

Bob - self proclaimed posting junkie!
See my Fortigate related scripts at: http://fortigate.camerabob.com

Bob - self proclaimed posting junkie!See my Fortigate related scripts at: http://fortigate.camerabob.com
nikolaj

Yes, I only add new subnets.

So can I do this change in two times, local and remote?

MikePruett
Valued Contributor

yeah, just setup the new phase 2 for that tunnel on the local side and then setup the mirror image of it on the remote side. then that phase 2 should become active and you can have that traffic flow as well.

Mike Pruett Fortinet GURU | Fortinet Training Videos
Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors