I newly implemented sd wan.
My sdwan has only 1 WAN interface.
I remove the previous static route configured on the wan interface.
I put a new static route for the sdwan interface.
Now i cannot ping or https from the wan interface.
Why?
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hi,
Sorry for misunderstanding the question.
The Lan link is SDWAN Zone?
If yes, from the version 7.0 and above it gives you option to configure two static routes with the different SDWAN Zone.
If the LAN is not part of the SDWAN then there is no possiblity to configure the two static route.
SDWAN it self has perfromance SLA, where you can enable the feature of "update static route", if WAN failed then whatever the best route is available it will choose.
Again I am sorry if I am not understanding the question correctly.
Thanks.
Hi,
Based on my understanding, changing the static route with the SDWAN interface won't affect anything.
However, I would like to confirm whether you've set the gateway for WAN1 inside the SDWAN configuration.
Could you please provide your SDWAN configuration?
config sys sdwan
show full
I already know the problem.
I am asking for a workaround.
I have an SDWAN link with WAN1.
I have another LAN link - LAN1.
I want 2 static route:
0.0.0.0/0 to WAN1 - do sdwan and ping to 8.8.8.8.
0.0.0.0/0 to LAN if WAN1 fails.
I know it cannot be done. But I want to know if there is a workaround.
Hi,
Sorry for misunderstanding the question.
The Lan link is SDWAN Zone?
If yes, from the version 7.0 and above it gives you option to configure two static routes with the different SDWAN Zone.
If the LAN is not part of the SDWAN then there is no possiblity to configure the two static route.
SDWAN it self has perfromance SLA, where you can enable the feature of "update static route", if WAN failed then whatever the best route is available it will choose.
Again I am sorry if I am not understanding the question correctly.
Thanks.
Ok thank you very much.!
SDWAN it self has perfromance SLA, where you can enable the feature of "update static route", if WAN failed then whatever the best route is available it will choose.
Hi,
How do you update static route?
What I want:
0.0.0.0/0 goto SDwan link (WAN1 and WAN2).
If sd-wan fails, update to 0.0.0.0/0 go to LAN2.
Is this possible, is there a workaround?
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1696 | |
1091 | |
752 | |
446 | |
228 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.