i have deployed fortianalyser container with this command
Docker run -it --restart always -p <Port Mapping>:443 -p <Port Mapping>:22 -p <Port Mapping>:541 --cap-add=ALL <image ID>:<Tag>
and then i go to the browser i put localhost:39443, it says
The connection was reset."
is the image fortinet/fortianalyser not stable or what !!
what is the solution please !!?
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Yes, that's what I thought too. So, I used the command '
docker run -it --restart always -p 8080:80 -p 3922:22 -p 541:541 --cap-add=ALL fortinet/fortianalyzer:latest'
to map port number 80 to 8080. However, the result remained unchanged !!
The https port mapped is 443, but you are trying to access it via 39443, can you please clarify?
Do you have CLI access? Can you verify the installation was completed successfully as suggested in below article?
https://community.fortinet.com/t5/FortiAnalyzer/Technical-Tip-FortiManager-FortiAnalyzer-deployment-...
Created on 07-30-2023 02:07 AM Edited on 07-30-2023 02:20 AM
hello srajeswaran
the full commade that i used it is :
docker run -it --restart always -d -p 39443:443 -p 3922:22 -p 541:541 --cap-add=ALL fortinet/fortianalyzer:latest
and then i write localhost:39443 in the browser and no thing happen just the message
also i don't have CLI access and i followed that article step by step but no result !!!
Can you try connecting via SSH 3922 port , this could confirm if the issue is with web ui or the image itself?
i have just tryed to connect to the container via ssh by this commande :
ssh admin@localhost -p 3922
and the result was :
kex_exchange_identification: Connection closed by remote host
Connection closed by ::1 port 3922
the problem in the image !?
It don't look like a problem with image, but since we are not able to have access we can't check it.
Can you activate a new instance , and add port mapping for port80 (http)) as well, this should avoid issues with certificates/encryption algorithms etc (which looks like the case in the current instance).
Yes, that's what I thought too. So, I used the command '
docker run -it --restart always -p 8080:80 -p 3922:22 -p 541:541 --cap-add=ALL fortinet/fortianalyzer:latest'
to map port number 80 to 8080. However, the result remained unchanged !!
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1517 | |
1013 | |
749 | |
443 | |
209 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.