can i direct connect two fortigates using a crossover cable and simulate a ipsec vpn tunnel (site to site) is this possible? has anyone ever tried to do this?
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hi
Yes, You can do it.
Even you can run IPSEC VPN between 2 VDOM.
dirkdigs wrote:can i direct connect two fortigates using a crossover cable and simulate a ipsec vpn tunnel (site to site) is this possible? has anyone ever tried to do this?
I have done this a few times in a test environment, though I do not recall needing to use cross-over cables. YMMV though.
NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C
great thanks. trying it now.
Yeap to vdoms and one vdom-link. You can still tie down two ports with a cross over.
PCNSE
NSE
StrongSwan
vdoms are not valid for this use case.
Dear dirkdigs, I test this scenario myself with VDOMs.
It works.
usually just put a router in the way, otherwise the tunnel is also the gateway
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1688 | |
1087 | |
752 | |
446 | |
228 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.