Have a forigate50 .had made a firmware upgrade to 2.50 build 269 But didnt think was better then my earlier versin 2.36 build 085. So I would downgrad my fortigate 50 to the earlier version. I did , but something has gone wrong, cant connect to the device at all(web or cli) The status LED is blinking constantly, totally crashdown :-(. What can I do, Please?
Plug the console cable in, connect to it using hyperterminal.
you will probably find that it is sitting at a prompt with boot failure.
You will need to upload the firmware to the unit using tftp, see the manual or knowledgebase on how to do this.
UK Based Technical Consultant
Specialising in Systems, Apps, SAN Storage and Networks, with over 25 Yrs IT experience.
UK Based Technical Consultant FCSE v2.5 FCSE v2.8 FCNSP v3 Specialising
in Systems, Apps, SAN Storage and Networks, with over 25 Yrs IT
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.