Support Forum
HS08
Contributor
Created on
When we use BGP, it's mandatory to set the interface in BGP neighbor and make static route to the BGP neighbor peer ip?
jbrines
New Contributor II
Created on
Hi Guys, New to FortiNAC. Looking to do a compliance check using the Persistent Agent to detect if the Windows OS is up to date and if it isn't send a message telling the user to update. The end goal after this would be ...
ed_udri
New Contributor
Created on
Hi, Right now using on login for our standalone FortiSwitches and wanted to setup LDAP for authentication. FortiSwitch_148F-FPOE, V7.2.9. Can't see an article on this but saw on that say it is not supported, however, tha...
paipvora
New Contributor
Created on
Edited on
We are aware of the kernel panic mode issue on 7.2.8 and intentionally avoided it. However, in the past month, we've suddenly been hit with many systems experiencing the "unexpected power off" issue. We use Fortimanager ...
clintz
New Contributor
Created on
Hi, is it possible to monitor per ip address created. for example under interface port 1 there are hundred Nat translation. 10.0.0.1 to 10.0.0.100. Can FortiGate tag SNMP to each ip address for network monitoring to crea...
Sylvain92
New Contributor II
Created on
Edited on
Hi everyone, I am unsuccessfully trying to implement Web Filter Category quota on my 40F. 2 problems: despite time limit set under a monitored category, (1) client device has access to websites falling within that catego...
van_sta
New Contributor III
Created on
Good afternoon, I have a question regarding user session logs. I have a group that has YouTube blocked but in the logs I see YouTube sessions that are blocked and sessions that are not and they download (??) 400 MG, can ...
