Support Forum
Created on
Edited on
Description
This article describes the basic requirements that must be met when configuring LACP between HA FortiGates and Nexus Switches configured for vPC.
Scope
FortiGate (all models/versions); Cisco Nexus switc...
Created on
Edited on
Description
This article will show how to correctly design the LACP bundling to FortiGate HA active-passive.
Scope
FortiGate HA.
Solution
In order to bundle the LACP interface facing to FortiGate HA active-pass...
Created on
DescriptionThis article describes the case when FortiOS min-links command permits disabling a LAG interface when the number of available ports in the aggregation drops below a specified number.ScopeFortiOS.Solution
After...
Created on
Edited on
Description
This article will serve as a guide on how to configure the LACP interface on HA-monitored interfaces when LACP is used for multicast traffic.
ScopeFortiGateSolution
Below shows the interfaces that are part of...
Created on
Edited on
Description
This article describes the expected topologies with LACP bundles in a FortiGate HA cluster.
Scope
FortiGate.
Solution
It is a question that is often asked when LACP connections to the local switches...
Created on
Edited on
Description
This article describes the behavior of LACP in an HA cluster.Scope
FortiGate in HA.
Solution
The scenario is described as follows:
An aggregate link (LACP) is configured on both devices acting one as Pr...
