Support Forum
HS08
Contributor
Created on
Edited on
My fortigate hub have BGP connection to the spoke, the spoke ip is 10.10.112.11 and BGP was established. But why i can't ping to that spoke bgp peer ip? So traffic from the hub can't reach the spoke using this tunnel int...
paulagonzalez
New Contributor
Created on
Hello, everyone.We've different sites with Fortigate 100F in HA. The different sites are connected via VPN, so they are visible to each other.We're testing the evaluation version of Fortimanager to evaluate its functiona...
kamarale
New Contributor II
Created on
Hello,I have a SSL indound inspection that is not working for email traffic. The action is "Bypassed" "Message SSL connection is bypassed" says on the SSL logs....does anyone know what cold be the case?On SSL profile we ...
HS08
Contributor
Created on
Edited on
When we use BGP, it's mandatory to set the interface in BGP neighbor and make static route to the BGP neighbor peer ip?
jbrines
New Contributor II
Created on
Hi Guys, New to FortiNAC. Looking to do a compliance check using the Persistent Agent to detect if the Windows OS is up to date and if it isn't send a message telling the user to update. The end goal after this would be ...
ed_udri
New Contributor
Created on
Hi, Right now using on login for our standalone FortiSwitches and wanted to setup LDAP for authentication. FortiSwitch_148F-FPOE, V7.2.9. Can't see an article on this but saw on that say it is not supported, however, tha...
paipvora
New Contributor
Created on
Edited on
We are aware of the kernel panic mode issue on 7.2.8 and intentionally avoided it. However, in the past month, we've suddenly been hit with many systems experiencing the "unexpected power off" issue. We use Fortimanager ...
