Support Forum
BKP09
New Contributor II
Created on
Hello,I am facing an error code to a random number of windows hosts (approximately 30/400 windows 11 home & windows 11 pro devices).The mentioned devices has recently appeared in the state " Running (OS settings outdated...
UdaM
New Contributor II
Created on
What are the IPs and ports need to open from private network for access SASE from FortiClient which protected by Firewall.
UdaM
New Contributor II
Created on
Edited on
Is there any way to block upload of the grater than 6 number of files within the 10 minutes above 25MB Thank you.
UdaM
New Contributor II
Created on
We configure Microsoft Entra ID SSO with FortiSASE support of Configuring FortiSASE with Entra ID SSO in FortiClient agent-based mode document. But we have faced error as below. Searching for solution...
sean3
Contributor
Created on
greetings all,we are using FortiGate firmware 7.2.10, the hardware device is installed in China and is connected to a FortiManager in Europe. I believe all the configuration is pushed from the FortiManager, for example, ...
Tauri
New Contributor
Created on
Hi!I'm struggling with CLI template in FortiManager right now. I must delete all dhcp servers and I made script where I use purge command, but the problem is, it gets stuck there. There is prompt where user must press y...
imrankatela
Visitor
Created on
Hey folks,I ran into a problem after migrating my WAN interface into SD-WAN because I wanted to add a secondary ISP connection. I know I should have added my ISP link to SD-WAN from the beginning but that's for another d...
kamarale
New Contributor II
Created on
Hello,Is there a way to see in Fortigate how much bandwidth (Mbps)is consuming an internal user?I recall before in fortiview it showed this but now (FortiOS 7.4) I can not see it. Only shows traffic in Bytes (MB). thank ...
