Support Forum
adecottignies_FTNT
Staff
Created on
Description
This article explains how multicast works within a FortiSwitch without igmp-snooping enabled.
Scope
FortiSwitch.
Solution
To test the multicast / igmp traffic, the tool mcjoin will be used.
This is available ...
yabhishek
Staff
Created on
DescriptionThis article describes how to troubleshoot the issue when mac-address is not getting learned on the port.ScopeFortiSwitch.Solution
In some scenarios, while moving a client from one port to another, the switch ...
dwivedis
Staff
Created on
Description
This article provides troubleshooting steps for Spanning Tree Protocol (STP) convergence issues between FortiSwitch and Cisco switches.
Scope
This applies to FortiSwitch devices.
Solution
Problem: STP con...
Adolfo_Z_H
Staff
Created on
Description
This article describes how to get advice about recommended FortiSwitch software releases.
ScopeAll FortiSwitch devices.Solution
This article describes how to get advice about recommended FortiSwitch software ...
sachitdas_FTNT
Staff
Created on
Edited on
Description
This article describes the Managed FortiSwitch configuration sync E flag due to an error reason: unable to find 'admin' in table 'system.admin'.
ScopeFortiGate, Managed FortiSwitches.Solution
FortiGate# exec ...
sachitdas_FTNT
Staff
Created on
DescriptionThis article describes the process of FortiSwitch Auto-Discovery and Authorization on FortiGate.ScopeFortiGate, Managed FortiSwitches.Solution
FortiSwitch sends FortiLink discovery frames.FortiGate adds Fort...
riteshpv
Staff
Created on
DescriptionThis article describes how to use the FortiGate Support Tool to gather captures for issues related to FortiSwitch ports or topology discrepancies.ScopeFortiGate v7.2 , v7.4, v7.6 and FortiSwitch v7.2 , v7.4, ...
riteshpv
Staff
Created on
Troubleshooting Tip: FortiSwitch port flap with laptop connected with wifi/wired using FortiEMS tags
DescriptionThis article describes how to handle a scenario where port flapping occurs when NAC is enabled on a FortiSwitch port.ScopeFortiSwitch v7.2 and v7.4 in FortiLink mode.Solution
The setup involves using NAC with ...