Hi All, FortiLink was working fine, with a FortiSwitch connected on port A of a 60f. All kit lost power, and now port A is still showing up and green but the FortiLink doesn't and is down. If I add port B to the FortiLink it momentarily comes back up...
I recently acquired a Fortigate 80F firewall appliance and have been working on configuring the Librenms system to retrieve certain metrics from the 80F. I have successfully set up the SNMP protocol and can view most of the interfaces on the Librenms...
Hi, I have some really strange things going on with SD WAN and FG30E (6.2.15). I dont really know when it happened but for some weeks now (mayber after the update to 6.2.15) the main WAN interface of the SD WAN is DOWN at around 8:15 every morning. I...
Hi i followed this docs https://docs.fortinet.com/document/fortigate/7.0.11/administration-guide/556915/installing-firmware-from-system-reboot to installing firmware from system rebootbut it doesn't show step 10. and show Fatal error: Loading FOS fai...
Why can I not see the interface config in the show or show full-configuration CLI outputs? There seems to be a relationship between the following 2 command formats:show <>config <>So for instanceconfig vpn ipsec phase1-interfaceshow vpn ipsec phase1-...
Hello, I am using FortiWifi 40F and the firewall is having latest 7.4.1 firmware. Since yesterday morning, the firewall is rebooting randomly. I have tried to look into the Firewall logs, policies and removed all the UTM attached, re-install firmware...
Hi, I am seeking for commonly recommendable design examples for inter-data center(between Primary and DR DC) using FortiGate.We're not running FortiGates on local sites so think this is not the case design for overlay communication using Fortinet SD-...
Dear Friends, I would like to know as per the below diagram.It is possible to do as per the below diagram.We have the public on FortiGate, the FortiGate configures DNAT public IP to VIP.Is it possible to see the client IP address on the WEB server?Wh...
