ask - Multi DDNS on 1 appliance

[papapuff]

Hi there,

Fortigate provide DDNS for 1 ID.

if I have 3 WAN connection, can I register to 3 ID different? 1 WAN connection has 1 ID ddns.

if yes, how to do that?

thank you

[HA · Accepted solution]

Hi,

Go into CLI mode 

Then

config system ddns edit 1 set ddns-server FortiGuardDDNS set ddns-domain "wan1xxx.fortiddns.com" set use-public-ip enable set monitor-interface "wan1" set update-interval 180 next

edit 1 set ddns-server FortiGuardDDNS set ddns-domain "wan2xxx.fortiddns.com" set use-public-ip enable set monitor-interface "wan2" set update-interval 180 next end

Regards,

HA

[papapuff]

hi, just want to add information.

what i mean multi ddns,will be like below:

WAN1, assigned to DDNS abc.fortiddns.com

WAN2, assigned to DDNS cba.fortiddns.com

WAN3, assigned to DDNS xyz.fortiddns.com

thanks.

[papapuff]

hello, any possibility here?

[HA · Accepted solution]

Hi,

Go into CLI mode 

Then

config system ddns edit 1 set ddns-server FortiGuardDDNS set ddns-domain "wan1xxx.fortiddns.com" set use-public-ip enable set monitor-interface "wan1" set update-interval 180 next

edit 1 set ddns-server FortiGuardDDNS set ddns-domain "wan2xxx.fortiddns.com" set use-public-ip enable set monitor-interface "wan2" set update-interval 180 next end

Regards,

HA

[rwpatterson · Accepted solution]

They should start with 'edit 0'. "edit 1" twice will overwrite the existing entry 1 while "edit 0" will use the next available entry.

[papapuff]

hi, thanks for all reply.

yes rwpatterson correct. but somehow our fortigate start with '1'.or at least what seen on GUI is entry '1'.

another questions but still in multiple DDNS.

I've setup entry '1' enable public ip, and others disable.

but public ip on entry '1' use dynamic IP Public from entry WAN2. is it by default?

and still ambiguity with option "public IP" here, and update-ïnterval purpose.

kindly please guide me. thank you.