antivirus and other fortiguard services update

[CAD]

Hello,

i have fortigate 200D ver5.2.3 i want to know the antivirus take update or not 

and also for the other fortigaurd services 

thanks

[ede_pfau]

Could you please re-phrase what your question is - whether the FGT will update the AV signatures automatically?

[CAD]

thanks for reply,

i want to know the process of the update service working automatically or not

thanks 

[ede_pfau]

In the web GUI, go to System > Config > Fortiguard.

Open "AV & IPS Download Options".

Check "Allow Push Update".

Check "Scheduled Update", "Every...3 hours" (adjust to your liking).

Now the Fortigate will fetch signature updates every 3 hours. In addition, as soon as new signatures are available from Fortiguard, a signal will be sent to the FGT to update immediately.

[sridharsre]

Hi ,

I have the same configurations as you suggested, but still AV/IPS's Definitions and Engines are two year or 3 years Old.

How to keep my definitions and engines up to date. Have checked the availability under PORT Selection, nothing happened.

Kindly help me on this.

Thanks in advance,

Sridhar S

[razor]

sridharsre wrote:

Hi ,

I have the same configurations as you suggested, but still AV/IPS's Definitions and Engines are two year or 3 years Old.

How to keep my definitions and engines up to date. Have checked the availability under PORT Selection, nothing happened.

Kindly help me on this.

Thanks in advance,

Sridhar S

You should verify the following:

- Are the FortiGuard subscriptions still valid/licensed?

- Verify the "AntiVirus & IPS Updates" panel at [link]https://IPFORIGATE/ng/system/fortiguard[/link]

[sridharsre]

Yes, they are with valid licenses

and the link is not working it seems.

Regards,

Sridhar S

[razor]

Ah, it is a page located in the 5.4 firmware.

Please follow these steps if you're using an earlier version: navigate to to System -> Config -> FortiGuard. Expand the "AV & IPS Download Options" panel to view the settings.

[sridharsre]

Thanks for your reply.

It is schedule to update in every hour only, no other settings are applied.

Allow push update is not enabled.

Kindly help me on this .

[razor]

Thanks for the quick reply.

Hmm seems to be ok, push updates is not really necessary for a good working update cycle.

Please follow the following steps: http://kb.fortinet.com/kb....do?externalID=FD32121

If the issue still persists after following the document above, please create a fortinet ticket at the support center.