I was setting up SNMP and it was written in the instructions that "if you have a HA cluster, then you need to reset the interface" but I indicated the one that was connected. And the second device from the cluster is unavailable because it is Active-Passive. (Fortigate 600D-LENC, firmware version 5.4.0)
How do I regain access to the device?
If I connect via COM port, what should I write?
Should I write the same way as when I replaced it, just specify the previous address?
With respect,
Daniil Dubosarskij
cit.rkomi.ru
Hey Dubos,
yes, switching one of the heartbeat interfaces with the HA management interface would cause some issues. Great that you found it, and I will make a note that in cluster issues, the HA configuration of both units should be compared to ensure the issues are not down to different interfaces selected for management, for example.
Cheers!
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.