my center fortigate device's ip address is 192.192.1.1,
Zone1 ip address 192.168.1.1,
Zone2 ip address 192.168.2.1,
Zone3 ip address 192.168.3.1
I created 1 dialin ipsec and ip address 192.168.168.20-192.168.168.25
All zones are connected to central fortigate device with ipsec vpn. i created ipsec vpn with forticlient and when i connect to central fortigate i can only access central fortgate network. but after connecting to central fortigate as system administrator i need to access zone fortigate devices and local networks.
Can you give me information on how to do this?
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hi Selokumus,
Is it possible to add those interfaces in same zone ?
Greetings,
I don't know what you mean.
Hi @selokumus,
If I understand correctly, Zone2 and 3 are on the other side of site to site VPN tunnels? Please provide more details and a network topology if possible. You can also run a debug flow to see if the traffic is being dropped. Please refer to https://community.fortinet.com/t5/FortiGate/Troubleshooting-Tip-First-steps-to-troubleshoot-connecti...
Regards,
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1660 | |
1071 | |
751 | |
443 | |
219 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.