Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hello
You can configure automation script to monitor Inbound and outbound Bandwidth and send it to the email
Hello,
You could create an automation stitch using the "Outbound bandwidth rate exceeded" or "Inbound bandwidth rate exceeded" events. However, please take into account the requirements for this configuration to work:
1. For the alert email to be sent when the Automation stitch is triggered, an Email server needs to be configured under System -> Advanced.
2.The Outbound bandwidth and Inbound bandwidth rate exceeded event will get generated only when FIPS-CC is enabled as per design.
Only certain versions and models are FIPS-CC certified and the configuration has to be done while the unit is in factory default settings.
KB Reference : https://community.fortinet.com/t5/FortiGate/Technical-Tip-Automation-stitch-configuration-for-inboun...
There is no Advanced setting under the system
it is possible to create in the Forti analyzer event handler
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1529 | |
1027 | |
749 | |
443 | |
209 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.