a

[obulareddy]

d

[Shashwati]

Hello

You can configure automation script to monitor Inbound and outbound Bandwidth and send it to the email

[jguerra]

Hello,

You could create an automation stitch using the "Outbound bandwidth rate exceeded" or "Inbound bandwidth rate exceeded" events. However, please take into account the requirements for this configuration to work:

1. For the alert email to be sent when the Automation stitch is triggered, an Email server needs to be configured under System -> Advanced.

2.The Outbound bandwidth and Inbound bandwidth rate exceeded event will get generated only when FIPS-CC is enabled as per design.

Only certain versions and models are FIPS-CC certified and the configuration has to be done while the unit is in factory default settings.

KB Reference : https://community.fortinet.com/t5/FortiGate/Technical-Tip-Automation-stitch-configuration-for-inboun...

[obulareddy]

There is no Advanced setting under the system

[obulareddy]

it is possible to create in the Forti analyzer event handler