Hello fellas, I've hit a snag trying to configure ZTNA to work with FQDN and I can't really seem to understand why.
Firstly I'll state that the configuration works when using IP addresses but when changing the IP address to a FQDN it just doesn't work.
the FQDN are configured on both the 'ZTNA Destinations' on the EMS server and the ZTNA Server on the FW there's a FQDN entry that resolves to the internal IP, I've also tried specifying the Virtual host and directing to the IP which also didn't work, I feel like I'm missing something along the way.
Thanks in advance.
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hello
Hello
Created on 08-27-2024 02:59 AM Edited on 08-27-2024 03:00 AM
Thank you for that, I was missing something, although the FW did resolve when creating a FQDN-entry on the targeted interface it did not resolve on the firewall level, creating a DNS Database and adding entries and directing the EMS server to the same DNS database helped resolve the issue.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1545 | |
1030 | |
749 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.