Hello,
I am having the following problem: I am using a FG 100A inside a network, in transparent mode. I also want to send logs to a FA 800B. I want to create a profile that will be used only for logs/content archive for HTTP, FTP and IM/P2P traffic.
The internal policy of the company is that if you want to log into Yahoo Messenger, you have to use a proxy server (the proxy ip address being the address of the gateway/firewall, other than FG, as it is in transparent mode, and the port 8080) or with the option " firewall with no proxy" .
Of course, if I want to enable content archive in my protection profile, I first must check the option for Yahoo in IM/P2P tab and then set content archive to summary or full.
But when I enable this profile in my security policy, I can' t log into Yahoo anymore. I must say that if the IM/P2P box is not checked in the profile, I can log into Yahoo without any problems.
To be more acurrate, in the following configuration I CAN' T log into Yahoo:
Firewall -> Protection Profile -> Edit Log_Profile -> open IM/P2P tab -> check Yahoo option (*) -> open Content Archive tab -> check Yahoo for " Archive IM to FortiAnalyzer/FortiGuard" option -> set option to full.
IF I don' t check the (*) option, (I cannot check Content Archive option anymore, of course), still using the protection profile into security policy, I CAN log into Yahoo without problems:
Firewall -> Policy -> internal to external allow all traffic using Log_Profile.
I am using MR6 Patch 3 on FG, but I tried MR7 Patch 1 also.
On FA I am using MR6 Patch 2, but I don' t think this could be the cause of the problem.
Does anyone know what' s happening? (I am using version 8.1.0.421 of Yahoo Messenger and 8.0.0.1 version of MyYahoo Module)
Thank you.