We have setup a point to point wireless bridge using 2 FAP234's as the parent and leaf AP's. The wireless bridge is intended as a backup route to a fibre connection should it go down. A diagram below shows the setup;
We are however having issues in that the wireless bridge does not pass traffic when the fibre link goes down, and although I do have a TAC case open, I'm hoping a member of the community could review the setup and point out anything that could be causing the problem.
One thing to highlight is that spanning tree is enabled on the switches that the AP's are connected to. Should spanning tree also be enabled on the AP's themselves, or is that managed by the switches?
Any help is welcome.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1547 | |
1031 | |
749 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.