Hi. Please help me.
Fortigate 60E-POE. FortiOS 7.2.1
Legacy client (802.11 g) can't connect to SSID with error: "deny assoc request, ht rate set mismatch"
Debug log from AP:
[32770.007364] [AUTH] cpu0 vap-00(wlan00): [dc:f5:05:89:af:53] recv auth frame with algorithm 0 seq 1
[32770.007387] [469.990] cpu0 wmi_unified_cmd_send: dev=wifi0 cmd_id=0x9022(WMI_PEER_CREATE_CMDID) if_id=0 vap=wlan00 peer_macaddr=dc:f5:05:89:af:53
[32770.007426] [CWD_VOICE] cpu0 vap-00(wlan00): ieee80211_admctl_init dc:f5:05:89:af:53
[32770.007444] [ASSOC] cpu0 vap-00(wlan00): [dc:f5:05:89:af:53] ieee80211_alloc_node: vap=0xc7330000, nodecount=8, ni=0xc58b3000 ref=2, ni_bss_node=0xc58b3000 bss_ref=2
[32770.007468] wsev: cmd=0x8C02 ev_len=28 skb_len=76 nlmsg(len=76,type=16,flags=0,seq=26647,pid=0) extra=Ьх‰ЇStЙ
[32770.007486] wsev: cmd=0x8C02 ev_len=12 skb_len=60 nlmsg(len=60,type=16,flags=0,seq=26648,pid=0) extra=Ьх‰ЇStЙ
[32770.007501] [AUTH] cpu0 vap-00(wlan00): [dc:f5:05:89:af:53] send auth frame seq 2 status 0
[32770.007518] wsev: cmd=0x8C02 ev_len=81 skb_len=132 nlmsg(len=132,type=16,flags=0,seq=26649,pid=0) extra=sta health: wlan00 act=19 ev=1 cip= 0 sip= 0 len=0
[32770.007663] [469.990] cpu0 wmi_htc_tx_complete : dev=wifi0 cmd_id=0x9022(WMI_PEER_CREATE_CMDID) if_id=0 vap=wlan00 peer_macaddr=dc:f5:05:89:af:53
[32770.013814] wsev: cmd=0x8C02 ev_len=81 skb_len=132 nlmsg(len=132,type=16,flags=0,seq=26650,pid=0) extra=sta health: wlan00 act=20 ev=0 cip= 0 sip= 0 len=0
[32770.013845] [MLME] cpu0 vap-00(wlan00): [dc:f5:05:89:af:53] WPA or RSN ie: mc 8/16 uc 8/13 key 2 caps 0xc
[32770.013876] [POWER] cpu0 vap-00(wlan00): [dc:f5:05:89:af:53] UAPSD bit settings: 00 - vap-0 (wlan00) from STA dc:f5:05:89:af:53
[32770.013897] [ASSOC] cpu0 vap-00(wlan00): [dc:f5:05:89:af:53] deny assoc request, ht rate set mismatch
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hi @usednet
This is a known issue on FGT firmware 7.2.1 , downgrade Fortigate firmware and the clients will be able to connect.
Refer to Mantis ID 836216 in the Release notes of Forti OS 7.2.1 ==> Known issues >> WiFi Controller section (page # 52)
Regards,
Manasa
Created on 08-10-2022 01:22 PM
Any news for my question?
I found that interface with mixed mode (80.11 b/g/n) can't accept 802.11g clients
If I configure interface in single 802.11g-only mode - issues is resolve
Hi @usednet
Can you please confirm if the issue started reporting after the Forti OS upgrade to 7.2.1 firmware?
Regards,
Manasa
Hi @usednet
This is a known issue on FGT firmware 7.2.1 , downgrade Fortigate firmware and the clients will be able to connect.
Refer to Mantis ID 836216 in the Release notes of Forti OS 7.2.1 ==> Known issues >> WiFi Controller section (page # 52)
Regards,
Manasa
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1702 | |
1092 | |
752 | |
446 | |
228 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.