Will SFP stop working if Warning values reached?

[mos6502]

I have an SFP+ interface that will flap every 24-36 hours. After doing the following commands

get switch modules limits

get switch modules status

I noticed that the Rx value is very near the Warning limit. Would or do SFP turn off when the Warning limit is reached?

My logs show items related to low power, but I am trying to understand if the device will disable/turn off SFP if the Warning threshold is reached?

[gfleming]

I don't have any experience with this but if I were you I would open a TAC case to get the best possible response...