Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
Aiko1979
New Contributor II

Will Fortimanager fail or skip variables if there are duplicates in the provisioning template?

Hello Everyone, 

 

 I have a production device that has already had our template that is for 1 MPLS -1 internet connection ran on it. I want to add another internet connection to that device. I already have a template for 1 MPLS- 2 internet connections which would be perfect. Would I be able to just add the variables for the 2nd internet connection and run the 1 MPLS-2 internet template even though it will have all the same variables from when I used the 1 MPLS- 1 internet except for the additional 2nd internet connection, or will it fail since there will essentially be duplicate variables? I thought I remember hearing or reading somewhere that it will just skip them, but maybe I made that up. 

 

Thanks!

1 Solution
Aiko1979
New Contributor II

I was able to test it out last night. I ran our prov template for the 2 internet connections and as far as just pushing the new template to the device, it was a success, zero errors. All I had to do was change the variables for the two wan interfaces I was modifying. I did have to manually remove the static routes on the Gate that didn't apply anymore which was done with someone onsite that was directly connected to it. Going forward, that can be scripted as well if needed. All in all, I'm happy I didn't have to factory default it and push the new template! 

View solution in original post

6 REPLIES 6
Anthony_E
Community Manager
Community Manager

Hello Aiko,


Thank you for using the Community Forum. I will seek to get you an answer or help. We will reply to this thread with an update as soon as possible.


Thanks,

Anthony-Fortinet Community Team.
Anthony_E
Community Manager
Community Manager

Hello Aiko,

 

We are still looking for someone to help you.

We will come back to you ASAP.


Regards,

Anthony-Fortinet Community Team.
Aiko1979
New Contributor II

I appreciate the update. 

Anthony_E
Community Manager
Community Manager

Hello @jasonhong,

 

Could you please have a look at this request?

 

Thanks a lot in advance.

 

Regards,

Anthony-Fortinet Community Team.
Aiko1979
New Contributor II

I was able to test it out last night. I ran our prov template for the 2 internet connections and as far as just pushing the new template to the device, it was a success, zero errors. All I had to do was change the variables for the two wan interfaces I was modifying. I did have to manually remove the static routes on the Gate that didn't apply anymore which was done with someone onsite that was directly connected to it. Going forward, that can be scripted as well if needed. All in all, I'm happy I didn't have to factory default it and push the new template! 

Anthony_E
Community Manager
Community Manager

Thanks a lot for sharing this solution!

Anthony-Fortinet Community Team.
Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors