Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
Kevmeister68
New Contributor

Why do Virtual IPs not allow "Named Addresses"

I apologise if this is a really newbie question, but I'm at a loss at to why the Fortigate allows me to define Addresses (eg. for a Workstation etc), but when I want to define a Virtual IP I cannot use one of the addresses that I have defined and have to supply a physical IP address?

 

What am I missing? Is this a missing feature from the Fortigate, or some logistical reason why it doesn't make sense to allow this?

1 REPLY 1
akileshc
Staff
Staff

Hello Kevmeister,

 

When the VIP type is set to Static NAT, you are implementing one-to-one NAT, thus you must enter an IP address, and address or address group is not permitted.


If you switch the type to FQDN, however, you may specify the IP/FQDN in External and Mapped addresses. Please see the document below for further information.

 

https://docs.fortinet.com/document/fortigate/7.0.2/administration-guide/435662/configure-fqdn-based-...

 

I hope this helps you implement the setup according to your needs.

Akilesh
Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors