Model: fortigate 400d
After I upgraded firmware from 5.4.5 to 6.2.3 I found that there are certificate-inspection and upg certificate-inspection. (refer to the attached picture.) At the moment, Fortigate 400d is using both certificates. Which one I should use?
Thank you
Solved! Go to Solution.
During the upgrade process some "conversion" scripts are run on the configuration to make some "older features" more compatible with newer firmware. This renaming/converting can get pretty "ugly" when going through 3 or 4 major revisions. Personally, as far as I can tell you could go back or switch to using the "stock" certificate-inspection, which is made "readonly" in the new firmwares. IMO.
NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C
During the upgrade process some "conversion" scripts are run on the configuration to make some "older features" more compatible with newer firmware. This renaming/converting can get pretty "ugly" when going through 3 or 4 major revisions. Personally, as far as I can tell you could go back or switch to using the "stock" certificate-inspection, which is made "readonly" in the new firmwares. IMO.
NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C
User | Count |
---|---|
2269 | |
1231 | |
772 | |
452 | |
391 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2025 Fortinet, Inc. All Rights Reserved.