What is OID of "Throughput " of FortiGate 50E and 60F?

[Th3rd]

I have a problem. I can monitor the throughput of FortiGate when FortiGate in HA mode. However, I cannot monitor the individual throughput of each interface.

My question:
1.) Can someone share me the OID to get the throughput when in HA mode?

2.) Also, please share me the OID of individual throughput?
3.) If I want to verify the value, I get from these OID is correct?

[rtanagras]

Hi @Th3rd - Please find my answers below to all your questions.

1.) Can someone share me the OID to get the throughput when in HA mode?
Answer: You might wanna check the HA info or HA stats in the MIB file for this.

2.) Also, please share me the OID of individual throughput?
Answer: You can use the MIB browser from iReasoning or the MIB importer from Paessler to check this. Here's the guide: https://community.fortinet.com/t5/FortiManager/Technical-Tip-How-to-get-and-troubleshoot-MIBs-and-OI...

3.) If I want to verify the value, I get from these OID is correct?
Answer: Normally, when you check the OID, it should have a description indicating what lookup value it should return. To see if it's the same on your FortiGate, you can perform an SNMP walk to compare the results with the descriptions specified for the OIDs.

[Th3rd]

Dear brother @rtanagras,

Thank for your explain.
However, I can't get the SNMP OID to monitor the throughput for my FortiGate devices. I check vai the link you share I still can't get any information about throughput OID.

IF CAN, Brother should you copy and past the OID of throughput for me?

Thank U for your always support..... :)