Webinterface Access via IP Sec VPN

[fohe]

Hi all, 

i am having 2 Fortigates, FW1 and FW2 connected via IPSec VPN and on both sides i have a client network, in this client network the management web interface is activated, now i want to access from the client network on FW1 the webinterface of the FW2  on the client interface, is this possible?

(The Client Networks are on both sides in the trusted hosts)

best regards

fohe

[jintrah_FTNT]

Hi,

Yes, it is very much possible. If you had client network on FW1 added to trusted hosts of FW2, the web management access should be possible.

Best regards,

Jin

[sw2090]

Don't you also need to have a policy to allow the traffic to flow?

[jintrah_FTNT]

yes, a policy is essential, and most likely added during the vpn creation to include the client networks participating through the tunnel.

best regards,

Jin

[Toshi_Esumi]

Since the tunnel is already working the policy is there already. Without it tunnel doesn't come up.

Toshi

[fohe · Accepted solution]

hi all, 

thanks for your input, the problem was the phase 2 selector :( added the net, and it worked. 

regards

feho