Created on 05-26-2005 02:07 PM
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Created on 05-27-2005 09:15 AM
delete an IP address as it is the physical interfacePerhaps I didn' t make myself clear enough. We purchased the 200A here. By default the nat/standalone setup we have the following: [4ports] internal, 192.168.1.99 [1port] dmz1, 10.10.10.1? (I could be wrong, I' m working from human memory) [1port] dmz2, no ip address assigned [1port] wan1, 192.168.1.99 (funny how that is assigned, duplicate ip) [1port] wan2, no ip address assigned of course all interfaces are ' up' . I was hoping to have wan1 also have no ip address assigned, yet have the interface ' up' and create vlan id' s ontop of it. I hope that makes it clearer. I could not find a method of doing that through the web interface. If it is not possible perhaps as a ' Good Idea' the development team could add a radio button with " blank" or " empty" or " no ip address" . Thanks!
Created on 05-27-2005 03:58 PM
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1517 | |
1013 | |
749 | |
443 | |
209 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.