WOL not passing through in Transparent mode

[lukam]

Hi!

I would like kindly ask if there is any option to let WOL messages through Fortigate that is setup in Transparent mode - currently I have only two rules IPv4 and IPv6 any any without any extra filtering through Fortigate but WOL messages originating from one side does not pass through Fortigate in this setup. Any ideas how to make it work?

Thank you,

Luka

[jintrah_FTNT]

Hi,

You can try setting the below on the interfaces where the magic packet arrive.

set l2forward enable 

best regards,

Jin