Hi all
I'm working on a WCCP Optimization with Riverbed.
The WCCP it self works and the init paket from the client to the server are forwarded to the Riverbed (WAN Optimization) and send to the server. All good at this point.
But, the return paket are sending directly to the client. But, Riverbed need this paket as well, because there are exchange information between the local and the remote Riverbed.
In Cisco example configuration you need to activate the WCCP on the outgoing and incoming ACL.
How can I solve this issue with a Fortigate?
Thanks in advance.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
How do you have the WCCP built ? on a 3rd leg { Tertiary Interface } ? And what are you using for forwarding GRE or L2. WCCP is straight forward for any WCCP client from fortigate side of things.
PCNSE
NSE
StrongSwan
Hi
WCCP Client ist on a dedicated Interface connected.
The WCCP configuration are follow:
config system wccp edit "101" set router-id 10.230.123.111 set server-list 10.230.123.10 255.255.255.255 set forward-method any set return-method any next end
And activated on the Interface and matching firewall policy with set wccp enable.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1673 | |
1083 | |
752 | |
446 | |
226 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.