Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
WAN1 configured for PPOE - gets its IP etc from the ISP - works fine. WAN2 configured with a Static IP adress (real world internet address via second ISP) WAN1 will respond to pings, https for admin etc. WAN2 will not respond to pings https etc, the interface is up, the IP address is a valid working IP (checked with another device)ok; that' s supposed to be. Probably your PPPoE wan1 iface has lower distance to its gateway (tipically 1) than your static wan iface (default to 10); you' re here near to a failover scenario. Look at Router->Monitor to get a picture.
We need to have the 2 ports active (using 1 for internet access, second for VOIP)ok, you' ll need to have the 2 wans configured with the same distance paramater to its gateways; after that, you' ll have to work by defining policy routes and appropiate firewall policies to met your traffic needs.
regards
/ Abel
Bob - self proclaimed posting junkie!
See my Fortigate related scripts at: http://fortigate.camerabob.com
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1517 | |
1013 | |
749 | |
443 | |
209 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.